Medium Cut Car Polish Rubbing Polish Compound for Car Care

 页面价格为1L包装价格，需要500ml和4KG包装请联系客服

一、S600使用说明：

1.首先将要抛光的车洗干净（局部抛光，可以只清洁需要抛光的范围）。
2.如果是要去深的划痕，先用2000#砂纸进行打磨，当磨完砂纸的时候，应该用清水或者湿毛巾把那些砂纸磨出来的粉尘清洁完，不可以让那些粉尘残留在油漆表面。

3.把蜡用海绵均匀的涂擦在需要打蜡的油漆表面（如果是全车打蜡，应该是局部的来操作。绝对不可以先把全车涂擦后再进行打蜡，因为这样操作蜡里面的溶剂就会挥发，打蜡的时候会出现很大的粉尘现象，还会导致烧漆的现象）。
4.用抛光机配合球状的中度海绵盘（普通的平面海绵也可以，也可以用羊毛球或者兔毛球等毛类产品来施工，海绵球表面一定要清洁，不可以有其他的蜡等物质黏附在上面）。
5.先把抛光机低速运转600转将蜡完全推开后，转速提到1400转。
6.直至把蜡全部收完，光亮度完全提升，划痕去掉后才可进行下一个局部面积的施工。
7.以此类推的全车施工完成后，建议进行清洗。如果是需要做镜面还原、封釉、镀膜等，必须用洗车液把表面残留的蜡质和油脂清洗擦干净后才可进行下一个环节的施工。

二、注意事项：
1.在通风良好的场所使用。
2.本品不用时请将盖子拧紧。
3.远离高温及明火。
4.避免儿童接触。

关于SYBON
SYBON（广东驰贝新材料有限公司）是一家专业从事汽车修补产品的制造商和出口商，我们位于广东省，有着便利的交通和优越的发展环境。我们公司追求卓越的品质和服务，产品符合国际质量标准，凭借先进的设备和严格的生产要求，在全球的各个市场获得了高度的赞赏。
我们主要提供全系列的汽车修补漆产品如：汽车漆/清漆/固化剂/填眼灰/苏灰士/底漆/钣金灰原子灰/抛光蜡等产品；辅剂（化白水、驳口水、除油剂、速干剂、防走水珠、柔软剂、哑光剂、定色剂和调和树脂等等）。也可供应汽车修补副产品：喷枪、砂纸、纸漏斗、除尘布、美纹纸等一站式汽车修补服务相关产品，诚心欢迎国内代理商及出口贸易商洽谈合作！

1.Wash the car to be polished (partial polishing, you can only clean the area that needs polishing).
2.If you want to remove deep scratches, first use 2000# sandpaper for sanding. When you finish sanding the sandpaper, you should clean the dust from the sandpaper with water or a wet towel. Do not let the dust remain on the paint surface.
3.Spread the wax evenly with a sponge on the paint surface that needs to be waxed (if the whole car is waxed, it should be done locally. It is absolutely not allowed to first apply the whole car before waxing, because the inside of the wax is operated like
this The solvent will volatilize, and there will be a lot of dust when waxing, and it will also cause the phenomenon of burning paint).
4.Use a polishing machine with a spherical medium sponge disc (ordinary flat sponges are also available, and woolen balls or rabbit hair balls can also be used for construction. The surface of the sponge balls must be clean, and no other waxes or other substances can stick to it. On it).
5.Run the polisher at low speed for 600 rpm and push the wax away completely, and the speed will increase to 1400 rpm.
6.Until all the wax is collected, the brightness is completely improved, and the scratches are removed before the next partial area construction can be carried out.
7.After the construction of the whole vehicle by analogy is completed, it is recommended to clean it. If you need to do mirror reduction, glaze sealing, coating, etc., you must use car wash liquid to clean the residual wax and grease on the surface before proceeding to the next stage of construction.

contact us and know more:
https://www.supersybon.com