Anticorrosive coating | 2,000+ products

Interfine 979 Acrylic Polysiloxane Topcoat Aksu International Brand White

Solvent-free Epoxy Coating Desulfurization Tower Anti-corrosion Paint Sewage Pool Green High Solid Solvent-free Epoxy Topcoat

Concrete structure surface coating, this product is reactive curing type.

Potassium water glass mortar, board joints shall be filled with caulking material in advance.

Petrolatum primer, able to maintain stable performance in harsh environmental conditions.

The storage temperature of polyester film sealing layer shall not be lower than 0 ℃.

For high-strength polyurethane materials, when brushing each time, the adjacent two-degree coating and scraping directions should be perpendicular to each other.

Organic silica gel waterproofing agent, after mixing evenly, you can scrape on the surface of the base.

JX-III type waterproofing agent, according to the standard, the thickness should be greater than or equal to 1.5mm.

PHC pile anti-corrosion coating, otherwise it will thicken or even agglomerated curing.

Polyurethane (PU) coating, coating thickness to be uniform.

WH-994 primer, the construction of the first grass-roots surface of the mortar bumps and other protrusions to eradicate.

Protective surface coating is playing an increasingly important role in industrial production.

Inorganic silicon primer, rapid thermal cycling, as an important protective material.

Butyl modified double membrane base waterproof coating, please protect skin and eyes.

Heavy-duty anti-corrosion compound (gray), no oil stains, dust and other attachments on the base surface.

Heavy anti-corrosion compound (green), clean the base surface before use.

Anti-carbonization material, it also needs to have the characteristics of non-slip, oil resistance and so on.

Vinyl resin paint to meet the requirements of the facility.

Cement lime mortar, industrial civilization and natural scenery complement each other.

Polyurethane caulking, can resist the erosion of chemical substances.

Alkyd anti-rust paint mixed paint steel structure metal anti-corrosion anti-rust paint industrial anti-rust paint

TA coating, a wide range of temperature adaptation.

Chlorosulfonated polyethylene topcoat anti-corrosion mechanical facilities acid and alkali resistant wear resistant anti-corrosion polyethylene paint

Storage tank edge plate CTPU elastic rubber material, good durability; heat resistance, UV resistance.

Factory direct supply epoxy sealing primer outdoor concrete substrate anti-corrosion high permeability industrial anti-corrosion paint

For the dimethyl (II) coating, the stirred product is directly brushed on the base surface and dried.

Modified polyurethane waterproof adhesive material, can maintain stable performance table under harsh environmental conditions

Anti-seepage SK hand scraping polyurea to promote the formation of new industrial productivity.

Long-term anti-corrosion coating, the formation of strong waterproof waterproof structure level.

For polymer heavy-duty anti-corrosion compound, the additional layer of paving shall be shorted.

Elastic powder, with raw materials with modifiers.

Class F solvent-free insulating varnish, resistant to medium penetration and resistance, tough coating.

The concrete finish coating and the joint groove shall be filled with sealing material after cleaning.

Anti-corrosion structural adhesive topcoat, joint surface reinforcement: after the plate seam is sealed (the product must be dry).

Cement-based permeable crystalline waterproof coating for balcony, toilet and kitchen

Plain coating for internal and external walls, leakage plugging and sealing of expansion joints, construction joints and structural joints.

X41 type dimethyl unsaturated polyester resin adhesive, the product is a one-component self-drying type, easy to paint.

S hand scraping polyurea composite tire base fabric, characterized by room temperature curing, fast response.

Silicone rubber polymer nano material, good weather resistance, good elasticity, corrosion resistance.