Water-Based Anti-Corrosion and Moisture-Proof Primer, Especially Suitable for Construction in Ventilated Environments Water-Based Anti-Corrosion and Moisture-Proof Primer

Polyurethane Waterproof Plugging Agent, Acid Fog Corrosion, Corrosive Liquid Splashing and Other Places.

Water-Based Fire Paint, Substances That Impede Penetration, Clean up Water Based Fire Retardant Coating

Water-Based Penetrating Paint, the Base Concrete Is Water Clean Enough Water-Based Penetrating Paint

Lightweight Anti-Corrosion Material with Excellent Light and Color Retention and Uv Resistance.

Resin Hole Sealing Agent, the Basic Composition and Performance of the Product before Construction Resin Hole Sealing Agent

Indoor Epoxy-Type Expansion Fire Retardant Coating, Refer to the Construction of the Product Description When Using.

Inorganic Modified Polyurethane Topcoat, Construction Temperature: Solvent Evaporates Quickly.

Bz Series of Special Heavy Anti-Corrosion Coatings, Often Use Wet Film Thickness Gauge to Measure the Thickness of Wet Film.

Inorganic Modified Epoxy Interface Agent, When Construction at High Temperature Temperature.

The Water-Based Graphene Heavy Anti-Corrosion Primer Should Be Applied after the First Coat Is Dry and Non-Stick.

Water-Based Glass Flake Medium Temperature Primer, Apply the Mixed Product Directly to the Base Surface and Let It Dry.

Glass Scale Medium Temperature Wear-Resistant Glue Clay, Open the Barrel and Stir Evenly before Using It Directly.

Water-Based Inorganic Nano-Grade a Flame Retardant Floor Paint, the Construction Temperature Must Be Above Zero Degrees on the Surface

Anti-Freshwater Shellfish Attachment and Functional Epoxy Coating with Good Construction and Rub Resistance.

Two-Component Penetrating Anti-Corrosion Coating Can Replace Frp and Rubber Lining.

Elastic Fluorocarbon Paint, Can Be Used as a Top Coat; Using the Brushing Method Elastic Fluorocarbon Coating

Ultra-Thin Type Epoxy-Type Fire Retardant Coating with Paint Film Thickness of the Protruding Parts.

Epoxy Mortar Layer Sealing Primer, Then Large-Scale Painting Epoxy Mortar Layer Sealing Primer

Anti-Static Epoxy Mortar Top Coat, for Edges, Corners, Welds, Cut Marks, Etc.

Dense Potassium Water Glass Concrete, the Thickness of the Paint Film Is Important Dense Potassium Water Glass Concrete

Model 2768 Inorganic Nano-Coating Primer, under Conditions of Lower Relative Humidity.

Water-Based Thin Waterproof Bottom Layer Ppu-M1, the Product Comes with Instructions from the Factory.

Medium Temperature Vinyl Glass Scale, It Is Not Recommended to Be Installed under Low Temperature Conditions Below Zero.

Thick Slurry Type Polyurethane Waterproof Coating, the Construction Shall Be Painted According to the Amount of Use.

Self-Leveling Epoxy Topcoat Top Coat, before Spraying, Should Be Applied First.

Ceramic Composite Water-Based Fluorocarbon Paint, Pay Attention to the Surface Condition of Coating and Atmospheric Environment.

Maca Model Anti-Corrosion Material, the Thickness of Each Paint Film Refers to Airless High-Pressure Spraying.

Concrete Surface Closing Agent, Reservoir Dam Grouting of Water Conservancy and Hydropower Projects.

Gdp Elastic Waterproof Glue Mud, Strictly Prohibited Fireworks at the Construction Site and Construction Site Air Circulation.

Inorganic Nano-Coating Primer, Pay Attention to the Light Loading and Unloading during Transportation to Avoid Container Damage.

Anti-Radon Gas Isolation Topcoat, Single Component, Good Storage Stability, Small Environmental Pollution.

Ultra-Thick Slurry Type Epoxy Asphalt Anti-Rust Topcoat (Water-Based), Product Performance as Waterproof and Anti-Corrosion Mater

Dsp Improved Waterproof Layer, Concrete Base Surface Should Be Smooth, Firm and Clean.

Thin Coating Type Polyurethane Waterproof Paint Topcoat (Water-Based), Good Ventilation at the Construction Site, Strictly

Seam Filling and Filling of Asphalt Yards Hoof Ester, Water Transfer Crack Plugging, Anti-Seepage Stitching and Filling Asphalt Yards Hoof Ester